Publicité
Les langues disponibles
Les langues disponibles
4. The charger will automatically discharge and recharge three times, with an
intermission of thirty minutes in between the cycles. The "READY" LED will
flash two times consecutively, then one time to indicate the number of
cycles to go. When the "READY" LED flashes while the other LEDs go off,
the battery's memory is erased and ready for use.
5. If the battery's capacity is 700 mAh, this mode will take approximately
seven hours under fast speed.
For batteries that are used daily, it is recommended to discharge the
battery once a week, and to deep condition the battery once a month in
order to achieve optimum performance for the battery.
FOR CELLULAR PHONE/VIDEO CAMERA BATTERIES
1. This charger can be used with various brands/models of cellular
phone/video camera batteries that are 4.8V, 6V, or 7.2V with the correct
battery mounting adaptor.
2. To charge a different brand/model or rechargeable AA, AAA size batteries,
simply purchase and use one of our other interchangeable battery
mounting adaptors.
1. This charger can to be used with 4, 5 or 6 pieces of AA or AAA size Ni-Cd
and Ni-MH batteries with the correct battery mounting adaptor.
2. All the instructions also applies to the charging of these batteries.
ADDITIONAL BATTERY MOUNTING ADAPTORS AVAILABLE
VL/A4
Ericsson 237/337/338, Sharp TQG 400, Ascom Calypso
Motorola 8000/9000/Ultra Classic, Pioneer PCH-610
VL/A1
VL/A2
Motorola 7200/7600/8200/MicroTac Series, JVC TN-J7/J10
Nokia 2110/2120, Philips PR747, Hitachi CRD 500
VL/A3
VL/A5
For Canon, Panasonic, JVC (Video Camera)
VL/A6
For AA size rechargeable Ni-Cd and Ni-MH batteries
For AAA size rechargeable Ni-Cd and Ni-MH batteries
VL/A7
SMART CHARGER
FOR AA- OR AAA-SIZE BATTERIES
8
VL7198
Publicité
