Velleman VL7198 Manuel D'utilisateur page 4

1. Align the dots on the battery
charger unit
mounting adaptor.
2. Push to the end until the battery
mounting adaptor is securely in
place.
1. Hold down the release button .
2. Push the battery mounting adaptor
towards the release button until
the dots on the battery charger
unit and the battery mounting
adaptor is aligned.
3. Remove the
adaptor.
1. Plug the AC/DC Adaptor into a convenient mains socket (If used in vehicle,
plug the DC Plug into a cigarette lighter socket).
2. Insert the small "jack" plug on the other end of the power cord into the
charger. Once the power supply has been connected, one of the "SPEED"
LEDs will light up.
SMART CHARGER
INSERT BATTERY MOUNTING ADAPTOR
and the battery
REMOVE BATTERY MOUNTING ADAPTOR
battery mounting
POWER UP THE MAIN UNIT
4
ô
VL7198
