HQ Power PROMIX22U Notice D'emploi page 6

e. USB
22. USB Connection
The USB connection can be used for playing MP3 or other audio files from a computer or for recording your
performance to a computer. The signal is sent to channels 4/5/USB.
NOTE: Be sure to turn channels 4/5/USB all the way down before connecting/disconnecting the USB cable.
3. Connections
Unbalanced equipment may be connected to balanced inputs/outputs. Either use mono ¼" jacks or connect the ring
and sleeve of TRS jacks. Never use unbalanced XLR connectors on the MIC input connectors when using the
phantom power supply.
Microphone input
Socket (female)
Headphones
1. Tip = left signal
2. Ring = right signal
3. Sleeve = ground
4. Tip
5. Ring
6. Sleeve
7. Strain relief clamp
Unbalanced use of mono ¼" plugs
1. Tip = signal
2. Sleeve = ground
3. Tip
4. Sleeve
5. Strain relief clamp
Balanced use of stereo ¼" plugs
1. Tip = hot (+)
2. Ring = cold (-)
3. Sleeve = ground
4. Tip
5. Ring
6. Sleeve
7. Strain relief clamp
PROMIX22U_v2
Group & mix outputs
Plug (male)
6 HQPOWER