Technical Data; Emissions - Mafell MKS 145 Ec Traduction De La Notice D'emploi Originale

2.3 Technical data

Universal motor,
interference suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth
Maximum cutting depth 30°/45°/60°
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, with parallel guide fence
Dimensions (W x L x H)

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
radio and TV 230 V~, 50 Hz
2600 W
14.5 A
1900 - 2300 rpm
1800 - 2200 rpm
65 - 145 mm (2 ½ - 5 5/8 in.)
125.5/102.5/72.5 mm (5, 4, 2 7/8 in.)
up to 60°
370/341 mm (14 ¾ / 13 ½ in.)
2.5 mm (3/32 in.)
4.2 mm (11/64 in.)
30 mm
58 mm (2 9/32 in.)
15,3 kg (33.7 lbs)
460 x 710 x 430 mm (18 1/8 x 28 x 17 in.)
L = 100 dB (A)
PA
K = 1,5 dB (A)
PA
L = 111 dB (A)
PA
K = 1,5 dB (A)
PA
.
2
-18-