Practice quickly detaching the power
tool from the carabiner as described
under "Disconnecting Machine from
Harness".
If you are using a shoulder strap:
Practice slipping the strap off your
shoulder.
If you are using a full harness: Practice
quickly opening the locking plate and
slipping the harness straps off your
shoulders.
KB-KM, KW-KM
Balancing the Machine
Balancing the Machine
3
Loosen the screw (3).
N
Slide the carrying ring up or down
N
the drive tube until the sweeping
attachments touch the ground.
Tighten down the screw on the
N
carrying ring firmly.
Starting / Stopping the
Engine
Starting the Engine
Always follow the operating instructions
for the KombiEngine and basic power
tool.
Place the unit on the ground.
N
The sweeping attachments may touch
the ground, but no other obstacles – risk
of accidents.
Make sure you have a firm footing,
N
either standing, stooping or
kneeling.
Hold the machine with you left hand
N
and press it down firmly – do not
touch the controls on the control
handle – see KombiEngine or basic
power tool instruction manual.
English
11