Mounting Depth Wheel - Stihl FSE 60 Notice D'emploi

English
8.2.1 STIHL AutoCut C 5-2
8
2
9
► Slip the mowing head (2) on to the shaft – as
AutoCut 5-2.
► Turn the spool (9) clockwise until the two
arrow heads line up – secure the spool in this
position.
► Insert the cap (8) in the spool, press it down
as far as stop and turn it clockwise at the
same time.
► Turn the cap until you feel resistance and then
tighten it down firmly by hand.
8.2.2 STIHL AutoCut C 6-2
► Place the mowing head (2) on the shaft (3)
while inserting the internal hexagon (2) on the
hexagon (4)
► Hold the mowing head (2) with your hand.
► Turn cap (1) clockwise and tighten it firmly by
hand.
28
8.3
► Hold the spool housing steady
► Unscrew the cap counterclockwise.
9
The depth wheel is included in the scope of sup‐
ply or is available as a special accessory.
It limits the working range of the mowing line.
– It helps reduce the risk of the rotating mowing
line causing damage (e.g. tree bark).
– It maintains the correct ground clearance
when edging.
The depth wheel (1) can be locked in three differ‐
ent positions (A, B or C) on the support (2). This
allows the reach of the mowing line to be varied.
A Working range of mowing line extends
beyond the outside diameter of the depth
wheel, e.g. for lawn edging.
B Working range of mowing line extends up to
outside diameter of depth wheel.
C Working range of mowing line does not reach
as far as outside diameter of depth wheel,
e.g. for mowing around trees.
1
9.1
2
3
4
► Push the depth wheel (1) into the required
position on the support (2) until the locking
hooks (3) engage.

9 Mounting Depth Wheel

Removing the Mowing Head
Mounting Depth Wheel
2
B
C
3
1
Mounting Depth Wheel on Sup‐
port
2
B
C
3
1
A
A
0458-282-9621-B