Mounting Depth Wheel - Stihl FSE 60 Notice D'emploi

English
STIHL AutoCut C 6-2
Slip the mowing head (2) over the
N
shaft (3) and engage its hex recess
on the external hexagon (4).
Hold mowing head (2) steady with
N
one hand.
Turn the cap (1) clockwise and
N
tighten it down firmly by hand.
Removing the Mowing Head
Hold the mowing head steady.
N
Unscrew the cap counterclockwise.
N
36

Mounting Depth Wheel

The depth wheel is included in the scope
1
of supply or is available as a special
accessory.
2
It limits the working range of the mowing
line.
It helps reduce the risk of the
–
3
rotating mowing line causing
damage (e.g. tree bark).
4
It maintains the correct ground
–
clearance when edging.
B
C
1
The depth wheel (1) can be locked in
three different positions (A, B or C) on
the support (2). This allows the reach of
the mowing line to be varied.
A Working range of mowing line
extends beyond the outside
diameter of the depth wheel, e.g. for
lawn edging.
B Working range of mowing line
extends up to outside diameter of
depth wheel.
C Working range of mowing line does
not reach as far as outside diameter
of depth wheel, e.g. for mowing
around trees.
2
A
3
Mounting Depth Wheel on Support
2
B
C
A
3
1
Push the depth wheel (1) into the
N
required position on the support (2)
until the locking hooks (3) engage.
Squeeze the locking hooks (3) together
to release the depth wheel (1) from the
support (2).
Fitting Depth Wheel on Deflector
1
Push the depth wheel (1) with
N
support on to the deflector (4).
FSE 60, FSE 71, FSE 81
4