How To Use - SOLIS 832 Mode D'emploi

OPERATION INSTRUCTIONS
Assembling the Jar
1. Put the rubber Sealing Ring [E] on the inner edge of the Cutting Blade [F]. (Fig. 1)
2. Put the cutting blade with sealing ring into the Cup Base [G]. (Fig. 2)
3. Mount the Glass Jar [C] onto the cup base and tune the cup base, and turn the Glass Jar [C]
clockwise as far as it will go until jar locks into place. (Fig. 3)
4. Mount the Measuring Cup [A] onto the Lid [B]. (Fig. 4)
5. Secure the Lid onto Jar and press down. (Fig. 5)
Inserting the Jar
1. Make sure that the blender is switched off (Switch in the «0» setting). (Fig. 6)
2. Place the jar assembly on to the Motor Base [H] and make sure that it is securely engaged. (Fig. 7)

How to Use

1. Place the foodstuff you wish to process into the jar. (Fig. 8)
2. Put the lid on the jar and close securely. Place the measuring cap into the hole in the lid and turn
clockwise to lock. (Fig. 9)
3. Switch on the motor base.
Speed Setting Use (Fig. 10)
1 – 5 various speed settings for liquids
0 stop operation
P for more solid consistency – for mixing liquids and solid foodstuffs
Ice Crush for ice crushing & short, powerful impulse movements
The switch does not permanently engage in the «P» (Pulse) setting. You have to hold the switch in the
«P» setting or turn it into the «5» setting. After using the blender, always move the switch into the «0»
setting and pull out the mains plug. To remove the glass jar simply lift it off the motor base. You do not
have to rotate the glass jar to remove it.
30