hergom MANCHESTER Mode D'emploi page 34

5 - INSTALLATION
UNPACKING
Industrias Hergóm has packed that Manchester
log stove with the utmost care for safe shipment.
However, under certain circumstances it may be
damaged during transportation and handling.
When you receive your stove, unpack it and
inspect it carefully, including all enclosed parts. If
any parts are damaged or missing, please contact
your Hergóm dealer immediately.
PACKING LIST
1 Manchester log stove.
1 Owner's manual.
1 Installation manual.
1 Safety glove.
INSTALLING THE STOVE
Choose a location for your Manchester log stove.
Check the location to ensure the stove and
chimney pipes are at the appropriate distance
from nearby combustibles materials. These can be
the walls, floor, ceiling or the chimney flue or items
installed on them. You should carefully consider
the distances to these combustible objects before
operating the stove.
If the ground on which the stove is to be placed
is made of combustible material, place a non-
combustible protective element between the floor
and the stove. An example of a non-combustible
protector for flooring is a base built with tiles,
bricks, slate, glass or other non-combustible
materials.
FIG. 1 - Recommended dimensions of the non-combustible
floor protection.
DISTANCES TO COMBUSTIBLE SURFACES
It is very important to comply with the minimum
safety distances to combustible objects, such as
walls and ceilings when installing the stove near a
combustible surface.
Distance in mm.
Distance from the
front in mm.
FIG. 2 - Distance to combustible surfaces
34
Parallel
E F G H
500 300 443 884
1000
Corner
I
500