File Menu; Datalogger Menu - SEFRAM TR1500 Notice D'utilisation

equivalent to the menu :

12.2 File menu

•
Open
To reload a « nomfichier.T15 » type file already saved on the graph
•
Close
Deletes the display of the graph in progress
•
Save
Saves the measurements of the graph and the set-up of the datalogger in the file in progress in the
form of a « nomfichier.T15 » file. If no file has been selected, a name and directory are asked to be
entered.
•
Create a text file
Creates an ascii text file readable by word processing software (eg : Word®)
Specifies at the start of files, the acquisition settings, then the date and measurements in the
columns.
This file cannot be read by TR1500 to display a graph. Only « T15 » compressed files allow this.
•
Create an Excel® file
Creates an Excel® compatible file
Puts at the beginning of the files all the acquisition settings then date and the measurements in
columns.
This gateway thus allows for other graphics to be made as well as the one accepted by TR1500 and
to use the measurements with other word processing software (usually Excel® compatible
software)
•
Print
Print the graph full page
Does not print the cursor and the measurements at this position.
The resolution is better than "print (screen copy)" especially for the characters.
Exceptionally some printer's drivers doesn't work with this printing, then choose "Print (screen
copy)" menu
•
Print (screen copy)
Print the graph full page. It the true copy of the screen
Does not print the cursor and the measurements at this position
The resolution is the screen pixel
•
Copy the diagram into the wordpad
Puts the graph into the wordpad. This could be used for insertion into another document (Word®
for example)

12.3 Datalogger menu

•
Scan datalogger
Open the « scan datalogger » window.
The software scans the dataloggers opposite the infrared link.
The scan starts at address 1 and every time a datalogger is detected, the message
« datalogger detected at address X » is displayed.
The maximum number of addresses can be programmed (4,8,16,32,63)
When this scan is over, the list box « 8 figure 1) is filled with the address and the name of each
datalogger detected.
When the scan is over the window is closed.
MTR15001F/03
« Datalogger» « Datalogger status »
Page 20 / 24
Sefram
Groupe General Electronique Mesure