Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Clip the module base onto the top-hat rail.
2. If the backplane is mounted vertically, turn the quick
release screws on the module to a vertical position,
respectively if it is mounted horizontally, turn the screws
to a horizontal position.
3. Press the quick release screws inwards with the screw-
driver until there is an audible click.
1.
Fig. 11. Plug the module into the base.
9. Commissioning
Switch on the measuring inputs and the power supply. The
green LED lights continuously after switching on.
The power supply unit must be capable of supplying
a brief current surge when switching on. The trans-
mitters presents a low impedance at the instant of
switching which requres a starting current I
e.g. 1...6 A.
10. Maintenance
No maintenance is required.
11. Releasing the transmitter
1. Rotate the quick release screws 90°.
2. Withdraw the plug-in module.
1.
Fig. 12. Withdraw the module from the base.
22
2.
3.
start
2.
12. Dimensional drawing
Fig. 13. Transmitter for RTD and TC inputs SIRAX V 606.
13. Accessories and spare parts
Description
Programming cable PK 610
DSUB 9p F
Ancillary cable
of
PC software V 600 plus on CD
(Download free of charge under
http://www.camillebauer.com)
Operating Instructions V 606-6 Bd-f-e
in German, French and English
Coding comb with 12 sets of codes
(for coding the backplane BP 902)
150.7
15
135.7
Interface
1 meter
2,0 meter
+0
18
– 0.5
Order No.
137 887
141 416
146 557
151 697
107 971
Publicité
Table des Matières
