Control Function; Engine Switch; Oil Warning Light (Red); Fuel Tank Cap - Yamaha MZ250 Manuel D'utilisation

Masquer les pouces Voir aussi pour MZ250:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41

CONTROL FUNCTION

Engine switch

The engine switch controls the ignition system.
2
1 "ON"
Ignition circuit is switched on.
1
The engine can be started.
2 "OFF"
Ignition circuit is switched off.
The engine will not run.

Oil warning light (red)

When the oil level falls below the lower level, the oil
warning light comes on and then the engine stops
automatically. Unless you refill with oil, the engine will
not start again.
TIP
If the engine stalls or does not start, turn the engine
switch to "ON" and then pull the recoil starter. If the oil
warning light flickers for a few seconds, the engine oil
is insufficient. Add oil and restart.

Fuel tank cap

Remove the fuel tank cap by turning it counterclock-
wise.
– 6 –

Publicité

Table des Matières
loading

Table des Matières