essentiel b ELF1014-2b Notice D'utilisation page 62

1. Stop the washing machine and unplug the
power cord.
2. Undo the cover using a coin.
3. Place a container under the cover to collect
the residual water.
Important: if the circuit is blocked, there may
be a lot of water!
4. Unscrew the filter slightly so that the water runs.
5. When the water has run out, remove the filter
completely from its housing in order to clean
it. Remove any foreign bodies.
6. Replace the filter by screwing it up, then
close the cover again.
Caution: If you do not reinstall the filter correctly, the water will run out of the
washing machine!
62