Connections; Connecting To The Water Supply; Connecting To The Drain - essentiel b ELF1014-2b Notice D'utilisation

connections

Connecting to the water supply
IMPORTANT:
• Your washing machine is designed to be connected to a cold-water supply.
• Your washing machine must be connected to the water pipes using the new supply
hose provided. Never use old supply hoses.
• Be sure to install the rubber seals provided at each end of the hose.
• In order for the washing machine to operate correctly, the water supply pressure must
be between 50 kPa and 800 kPa.
• If in doubt, consult a qualified plumber.
1. Connect the elbow end of the hose to the threaded inlet at the rear of the appliance.
2. Connect the other end of the hose to the water tap. Then ensure the nut is tightened
correctly by hand.
3. Open the tap fully after connecting the hose to check the installation is leaktight.
To prevent any water leak or water damage, leave the tap closed when the washing
machine is not used for a prolonged period of time.
Connecting to the drain
1
3
2
41