Electrical Connection - essentiel b ELF1014-2b Notice D'utilisation

The drain hose can be installed in 3 different ways:
Method No. 1: Position the hose over the edge of a sink using a special "U" device (not
supplied).
Method No. 2: Fix the end of the drain hose to the drain: the drain hose opening must
be at least 60 cm and at most 90 cm from the floor.
Method No. 3: Fix the hose onto the sink drain system (it must be fixed correctly). Use
of a jubilee clip (not supplied) is recommended.
CAUTION:
• Your house will be flooded if the drain hose comes out of its housing when draining.
• There is a risk of burns from the high washing temperatures! Fix the drain hose
securely in order to prevent such situations and ensure that the washing machine
takes in and drains water without issue.
• If the drain hose is raised after its installation, it becomes harder for the water to drain,
and the laundry may be considerably wetter. This is why the heights set out in the
diagram must be respected.
Electrical connection
• Before plugging in your appliance, ensure that the electrical voltage in your home
matches that shown on the appliance rating plate. Check that the fuses and the
domestic electrical installation are capable of bearing the load from the appliance
(see the appliance rating plate).
• Do not use an extension lead or multi-socket adaptor with this appliance.
• The power cord plug must be easily accessible after the appliance is installed.
• If the power cable is damaged it must be replaced by your retailer, its after-sales
department or a similarly qualified person in order to prevent any danger.
42
• Plug your washing machine into an earthed socket that is correctly
installed and connected to the electricity network in accordance with
current standards.
• This appliance can only be connected to 220 - 230 V~ single phase
50 Hz.
[or]
[or]