Knick Stratos Evo Série Mode D'emploi page 18

18 Selecting the Calibration Mode (pH)
Sensor
Select: Temp detection during calibration, calibration mode
1 Press menu key.
Select CONF using  keys,
2
press enter.
Select parameter set using  keys,
3
press enter.
Select SENSOR menu using  keys,
4
press enter.
5 All items of this menu group are indicated by the "SNS:"
code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) by pressing enter.
6 Exit: Press meas key until the [meas] mode indicator is
displayed.
Select sensor type
Select type of temp probe
Temperature unit
Temp detection during measurement
(Manual temperature)
Temp detection during calibration
(Manual temperature)
Calibration mode
(AUTO: Buffer set)
Calibration timer
Calibration cycle
Cleaning cycles
Cleaning cycle counter
Sterilization cycles
Sterilization cycle counter