Knick Stratos Evo Série Mode D'emploi page 3

Inserting a Module
3
Measuring modules for connection of conventional sensors (pH, Oxy)
Measuring modules for the connection of conventional sensors are simply inserted
into the module slot. Upon initial start-up, the analyzer automatically recognizes the
module and adjusts the software correspondingly. When you replace the measur-
ing module, you must select the corresponding measuring function in the "Service"
menu.
Measuring module for 2nd Memosens channel
If you want to measure two process variables using Memosens sensors, you must
insert a Memosens module for the second channel. See Page 27.
The operating mode for multi-channel measurement ("device type") must be
selected in the Service menu.
The following combinations are possible:
Memosens pH + Memosens pH
Memosens pH + Memosens Oxy