Formatting The Internal Memory - Boss RC-3 Mode D'emploi

Changing the Switching Order of Recording g
Overdubbing g Playback
When you press the pedal, the RC-3 will switch its operation in the
order of recording g overdubbing g playback (default setting)
(p. 6). However, you can change this so that the order is recording g
playback g overdubbing (RC-2 compatible).
1. While holding down the [TAP TEMPO] button, turn
on the power (insert a plug into the OUTPUT A jack).
2. Use the [ ] / [ ] buttons to select the desired mode.
Display Explanation
Operation will switch in the order of Recording g
rd
Overdubbing g Playback (default setting).
Operation will switch in the order of Recording g
rP
Playback g Overdubbing (RC-2 compatible).
3. Press the [TAP TEMPO] button to return to normal
operation.

Formatting the Internal Memory

* When you format the RC-3's internal memory, all phrase
memories that were saved will be erased, and cannot be
recovered.
Do not format the internal memory unless the display
indicates " " and the RC-3 has stopped operating correctly.
Er
1. While holding down the [WRITE] button and the
[RHYTHM ON/OFF] button, turn on the power (insert
a plug into the OUTPUT A jack).
The display will indicate "
FN
2. Press the [RHYTHM ON/OFF] button once again.
The display will blink " . "
FN
3. Press the [WRITE] button; formatting of the internal
memory will begin.
The indication " " in the display will blink rapidly. When
FN
formatting is completed, the RC-3 will return to normal
operation.
* Never turn off the power while "
Other Settings
. "
" is blinking rapidly.
FN
19