Reversing The Rotation For Instruments With Measuring Ranges 150; Spare Parts - Camille Bauer KINAX WT 707 Mode D'emploi

If, however, a transmitter be changed from one to the other
(see wiring diagrams in Fig. 4 and 7), the beginning and end
of the measuring range must be readjusted.
10. Reversing the rotation for instruments
with measuring ranges 150
A switch is provided on angular transmitters with a measuring
range > 150 ° for reversing the direction of rotation. It is
marked S1 (Fig. 9 and Fig. 10).
At the version ...
... with plug-in connector remove the S1 sealing screw
(2.2) (Fig. 9, left).
... with screw terminals and cable glands, remove the
3 screws (3.2) and the cover (3.1) (Fig.6, left).
Caution! The screw terminals (4.1)
are live.
The 230 V power supply is potentially
dangerous!
Then operate the switch by turning it a quarter of a turn with
a watchmakers screwdriver (2.3 mm diam.) and reset the
beginning and end of the measuring range.
Attention! In instruments with measuring
range less than 150
is not existing.
Forcing a watchmaker's screwdriver
into the opening will damage the PCB.

11. Spare parts

11.1 Parts common to both versions, i.e. with plug-in
connector and with screw terminals and cable glands
1
Description
Foot
for fi xing the KINAX WT 707 with ...
... 3 hexagon bolts M6 × 30
... 3 spring washers B6
... 3 washers 6.4/12.5 ×1.6
Flange
for fi xing the KINAX WT 707 with ...
... 3 Allen socket screws, M6 ×20
... 3 spring washers B6
... 3 washers 6.4/12.5 ×1.6
Seal
between rear (2) or (3) (cover)
and housing (main part)
as O ring 94.97 ×1.78
11.2 Parts only for versions with plug-in connectors
1
Description
Rear (2) (cover)
in plastic, black,
without securing screws,
connector (1) and
sealing screws (2.2)
28
°
° the switch S1
Order No
997 182
11.3 Parts only for versions with screw terminals and
997 190
991 861
Order No
988 454
1
fi gures and text above.
1
Description
Rear (2) (cover)
in plastic, blue (for Ex version),
without securing screws,
connector (1) and
sealing screws (2.2)
Plug (1.1)
with leads to the measuring
transmitter,
without connector case (1.2) and
securing screws
4 securing screws
K30 ×9.5, for fi xing the plug (1.1)
Connector case (1.2)
without plug (1.1)
Set of securing parts and seals
consisting of ...
... 3 Philips screws 2 ×M6×25,
1×M6×12, for fi xing the rear (2)
... 3 sealing rings for Philips
screws above
... 4 securing screws K30 ×9.5,
for fi xing the plug (1.1)
... 3 sealing screws (2.2) M5 ×10,
for covering the ZERO, SPAN
and S1 settings
Description 1
Switching supply unit
24 ... 60 V DC/AC, not moulded,
with socket
85 ... 230 V DC/AC, not moulded,
with socket
24 ... 60 V DC/AC, moulded,
with socket
85 ... 230 V DC/AC, moulded,
with socket
cable glands
Description 1
Rear (3) (cover)
in metal (aluminium), black,
without securing screws,
cover (3.1) and cable glands (4)
Rear (3) (cover)
in metal (aluminium), black,
with securing screws
(3 small-headed cylindric screws M6 ×10),
without cover (3.1) and cable glands (4)
Cover (3.1)
for rear (3) with ...
... fl at cover seal
... 3 lens-headed screws M4 ×12
... 3 screw sealing rings
... 3 O rings CR 3.0 ×1 for screws
Switching supply unit
24 ... 60 V DC/AC, not moulded,
and connecting PCB with
4 screw terminals (4.1)
The numbers in brackets, e.g. (1.1), are item numbers used in the
Order No
988 909
988 785
982 216
988 470
996 879
Order No
988 420
988 462
991 978
991 986
Order No
995 300
997 231
997 207
995 425