Riester ri-magic HPLED Mode D'emploi page 16

Table of Contents
1. Introduction
1.1. Important information to note prior to initial setup.
1.2. Safety symbols
1.3. Packaging symbols
1.4. Intended use
1.4.1 Indication
1.4.2 Contraindication
1.4.3 Intended patient population
1.4.4 Intended operators/users
1.4.5 Required skills/operator training
1.4.6 Environmental conditions
1.5 Warnings/caution
1.6 User responsibility
1.7. Scope of delivery
2. Initial setup of the device
2.1. Device function
2.2. Purpose
3. Assembly instructions before initial setup
3.1. ri-magic®HPLED table model
3.2. ri-magic®HPLED wall model
3.3 ri-magic® HPLED floor model
3.4. Initial setup and function
4. Note on the flexible arm
5. Care instructions
6. Cleaning and disinfection
6.1. Accessories
7. Technical specifications
8. Maintenance
9. Standards
10. Disposal of packaging
11. Explosion hazard
12. Disposal of accessories and device
13. Accompanying documents on electromagnetic compatibility according to
IEC 60601-1-2, 2014, Ed. 4.0
13.1. Disposal
14. Warranty
1.Introduction
1.1Important Information Prior to Initial Setup.
You have purchased a high-quality Riester product, which has been manufactured in com-
pliance with Directive (EU) 2017/75 and is always subject to the strictest quality controls.
Read these instructions for use (IFU) carefully before using the device and keep them in a
safe place. If you have any questions, we are available at any time, and our contact infor-
mation is provided at the end of this IFU. The address of our sales partner can be obtained
up on request. Please note all instruments described in these instructions for use may
only be used by appropriately trained personnel. The safe functioning of this device is only
guaranteed if Riester original parts and accessories are used.
16