Publicité
Les langues disponibles
Les langues disponibles
4.0 Maintenance
4.1 Troubleshooting
Branches are not cut off
Turn the adjustment buttons half a round clockwisely, adjust the spacing between the
cutting blade and the baffle.
the motor cannot start
check the supply cord, connector plugs and the interlocks whether they are in normal
conditions or not.
see 4.4.
the cutting blade run in the reverse position
adjust the running direction of the cutting blade.
the feed funnel blocked
pull out the trees from the feed intake opening, use a bar for pushing materials or wider
trees to insert
4.2 Maintenance
Take care of your machine and clean it regularly to obtain long-lasting efficiency and
performance.
Keep the air vents clean and free from dust.
Never wet or spray water on the machine.
Do not use detergents or solvents as these could cause irreparable damage to your
machine. Chemicals can destroy the plastic parts.
The tightness of the fastening screws of the undercarriage should be checked from time
to time.
To protect the shredder from corrosion when storing for a longer period, treat the cutting
blade with harmless oil to the environment.
11
Publicité
