Gardeo GBV2501SWB Traduction Des Instructions D'origine page 57

3.6 Shredder start-up： ： ： ：
Put the grass box in place ①;
1.
2. Press the key of the interlock switch②;
3. Connect the power③;
4. Press the green button "1" to switch on the shredder.
5. Put the materials
6. Press the red button "0" to switch off .
3.7 When the grass box is full :
The level of shredded scrap material in the collection reservoir can be monitored by looking through the
slots on the upper face of the base frame. Always empty the collection tank in time to avoid filling sound.
1. Press the red button "0" to switch off;
2. Pull out the key of the interlock switch② ;
3. Pull out the grass box①.
7