Publicité
Les langues disponibles
Les langues disponibles
3.4 Overload protector
The motor is equipped with a safety switch and switches off automatically when overload (e.g.
blocking up of the cutting blades). After a cooling-down break (approx. 5 min), the motor may
be restarted. Press the
1. reset button(overload protector)
2. green button "1" to restart
3.5 Instruction for using the shredder:
1. Press ON, machine run.
2. The reverse switch is effective when the machine in a good condition as the machine is in
the normal state. Then press the clockwise button to make it run in clockwise position,
press the anticlockwise button to make it run in opposite position.
3. Pull out the grass box when the machine running, the machine will stop.
4. In the "3"condition, push into the grass box, the machine will not run unless press the "on"
button.
5. AS the machine is running, suddenly turn off the power line, the machine stops, quickly
turn on the power again, it will not run unless press the "on" button.
6. No matter in what condition, just press the "off" button to stop the machine, then the
manual running and reverse switch is not effective.
Always wait until the shredder has come to
a complete standstill before restarting it.
6
Publicité
