Gardeo GBV2501SWB Traduction Des Instructions D'origine page 58

Tips
Large objects or woody pieces will be removed after several operations in both cutting
and releasing directions.
Use a pusher or clearing hook to remove blocked objects from the feeding funnel and
ejection slot.
1. Longer material standing out from the shredder could lash out when being pulled in by the
cutting blade. Please keep at safe distance!
2. The machine have the function that if it blocked, it run in the reverse position automatically,
then pulling out the branch.
3. Look into the grass box to check whether full or not, clear it in time for a period
time of cutting.
4、Only insert as much material so as to prevent blockage of the feeding funnel
5、Chop garden waste that has been stored for some days and is wilted and damp alternately
with branches
6、Do not fill soft waste such as kitchen rubbish into the shredder but compost them.
7、Widely branched material with leaves must be completely chopped before new material is
fed.
7. When tearing branches with sheets may be supplied the others to things which can be torn
only after the completion.
8. State before new supply that the broad branches with sheets are already completely torn.
9、The ventilation slots must not be covered by the waste bag or the chopped material.
Caution! Always wait for the shredder to be idle before switching it on again.
8