Publicité
Les langues disponibles
Les langues disponibles
3.0.
Instructions for use
Preparation
Warning!
1. Do not allow children to operate this equipment.
2. Do not operate this equipment near spectators.
3. Wear ear protection and safety glasses at all times when operating this machine.
4. Avoid wearing loose clothing or with ropes or links that float.
5. Only operate the machine in an open space (eg. Not near a wall or other fixed object) and on a firm,
level surface.
6. Do not operate the machine on a paved or gravel where the ejected material could cause injury.
7. Before starting the machine, check that all screws, all nuts, bolts and other fasteners are properly
tightened and that the guards and shields are in place. Replace damaged or illegible labels.
Operating Instructions
Warning!
1.
Before starting the machine, look into the feeding chamber to make sure that it is empty.
2.
Keep your face and body away from the feed intake opening.
3.
Do not allow your hands or any other part of your body or your clothing to get inside the
feeding chamber, discharge chute, or near any moving part.
4.
Keep proper balance and footing at all times. Do not overreach. Never stand at a higher
level than the base of the machine when feeding material into it.
5.
Always keep the discharge zone clear when operating this machine;
6.
When feeding material into the machine be extremely careful that pieces of metal, rocks,
bottles, tins or other foreign objects are not included.
7.
If the cutting mechanism strikes any foreign objects, or if the machine should start making
any unusual noise or vibration, shut off the motor and allow the machine to stop. Unplug
the connection cable (to disconnect the electric unit from the power supply) and take the
following steps:
a)
inspect for damage;
b)
check for and tighten any loose parts;
c)
have any damaged parts replaced or repaired with parts having equivalent
specifications.
8.
Do not allow processed material to build up in the discharge zone; this may prevent
proper discharge and can result in kickback of material through the feed intake opening.
9.
If the machine becomes clogged, shut off the motor and unplug the connection cable (to
disconnect the electric unit from the power supply) before clearing any debris. Keep the
motor (ventilation slots) clear of debris and other accumulations to prevent damage to the
motor or possible fire.
10. Keep all guards and deflectors in place and in good working condition.
11. Do not transport this machine while the motor is running.
3
Publicité
