Battery Auto-Test; Dc And Ac Voltages - Chauvin Arnoux CDA 103 Mode D'emploi

2.3 DISPLAY
A 2000 measurement counts.
B kW : One ohmmeter range, 2kW.
C mV and V : Four voltmeter ranges.
D : symbol for continuity sound test:
Displayed simultaneously with kW symbol.
E HOLD (only on CDA 104).
Holds display for approx 20 seconds, the
multitester being disconnected from the
circuit.
F
G : DC voltage measurement.
H - : negative measurement on DC voltage.
I ~ : AC voltage measurement.

3 - BATTERY AUTO-TEST

Press in the push button on the back of the ins-
trument.
The display sets to the 2 kW range and the
symbol appears briefly.
If this symbol remains displayed, change both
1.5V batteries (R6).

4 - DC AND AC VOLTAGES

Always check the condition of the batte-
ries before using your multitester.
Connect to the circuit to be tested.
- The multitester switches ON automatically
- Automatic recognition of DC and AC
- Automatic range selection
Read the measured value
NB : If the display is not activated there is no
voltage, or there is a voltage present less than
600 mV.
: low battery indication.
14