For maintenance, use only specified
spare parts. The manufacturer will not
be held responsible for any accident occurring
following a repair done other than by its After
Sales Service or approved repairers.
8.1 REPLACING THE BATTERY
Never open the multitester before discon-
necting it from all sources of electricity.
Undo the two tool-release screws and open the
case.
Replace the two batteries, in accordance with the
polarity shown inside the battery clips.
8.2 CLEANING
Clean the case with a cloth slightly moistened
with soapy water. Wipe off with a damp cloth. Then
dry quickly with a cloth or in a hot air flow.
8.3 STORAGE
If the tester is not used for more than 60 days,
remove the battery and store it separately.
7 - TIDYING AWAY
8 - MAINTENANCE
To slide your multitester
into your pocket, or bet-
ter, into case n° 10, com-
plete with clip for the
waist belt :
clip the removable
prod on to the back
of the instrument.
wind round the lead
and slide in the prod
as shown on the
diagram.
1 8