Transporting Cleaning Agent - Storch 140 HOT Mode D'emploi

6.2 Rolling up the electrical lead and storing accesso-
ries
To prevent accidents, always carefully roll up the electri-
cal lead and the high pressure hose.
Place the spray lance into the storage position.
6.4 Storing the cleaner (below 0° C)
Store the cleaner in a dry room without danger of frost or
protect as below:
1.
Remove the water inlet hose from the cleaner.
2.
Remove the spray lance.
3.
Switch on the cleaner with the main switch in position
„Cold Water".
4.
Operate the spray gun.
5. Open the cover (A)
6. Gradually pour antifreeze (approx. 5 litres) into the
water tank.
7.
During suction operate the spray gun two or three times.
8.
The machine is protected against frost when antifreeze
solution emerges from the spray gun.
9.
Lock the safety catch on the spray gun.
10.
Close the cover
11.
Switch off the cleaner.
12.
To avoid any risks, store the cleaner temporarily in a
heated room in upright position.
13.
When the machine is put into service again, the antifreeze
solution can be collected and stored for future use.
6.5 Transporting the cleaner
The machine can be in either upright position or tilted
position during transportation.
Use the fixing points (B) when securing with belts.
Notice the risk of leaking water by sudden heavy
movements during transportation.
99 Original instruction