Description Of Components - SilverCrest SADP 4 A1 Mode D'emploi Et Consignes De Sécurité

■ Do not expose the device to direct sunlight or high temperatures. Otherwise it may
overheat and be irreparably damaged.
■ DANGER! Do not operate the device close to naked flames (e.g. candles) and
do not place burning candles next to the device. This will help to prevent fires.
■ The device may heat up while it is charging. Place the device in a well-ventilated
location during the charging process and do not cover it.
■ If you notice unusual noise, a burnt smell or smoke, immediately disconnect the cable
from the device. Have the device checked by a qualified specialist before using it again.
■ All repairs must be carried out by authorised specialist companies or by the customer
service department. Improper repairs may put the user at risk. It will also invalidate
any warranty claims.
■ The device has an integrated lithium-polymer battery. Improper use of lithium-polymer
batteries can cause fires, explosions, leakages of hazardous materials or other
hazards! Do not throw the device into an open fire.
■ Do not make any unauthorised modifications or alterations to the device.
This device may not be opened by the user.
■ Battery acid leaking from a battery can cause skin irritation. If it contacts your skin,
rinse off with plenty of water. If the liquid comes into contact with your eyes, rinse
thoroughly with plenty of water, do not rub and consult a doctor immediately.

Description of components

(See fold-out page for illustrations)
Display
Menu button
Sensor (for optical pulse measurement)
Charging contact (tracker)
Charging cable
Charging contact (charger cable)
Operating instructions (symbol)
│ GB │ IE
■ 26
SADP 4 A1