Table Des Matières; Symbols; Technical Data; Intended Use - Festool TRC 3 Notice D'utilisation D'origine/Liste De Pièces De Rechange

Masquer les pouces Voir aussi pour TRC 3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Contents
1
Symbols .................................. 9
2
Technical data .......................... 9
3
Intended use............................ 9
4
Safety instructions .................... 9
5
Operation ................................ 10
6
7
Disposal .................................. 10
8
Warranty ................................. 10
9
2

Technical data

Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times forr
Permitted charging temperature range
Temperature monitoring
3

Intended use

The charger TRC 3 is design for charging the
battery packs listed.
The charger is design for internal use only.
WARNING
The user will be liable for damage due
to improper use.
4

Safety instructions

Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
- The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suffi-
cient experience and/or knowledge,
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1
LiIon 1,3 Ah/ 2,6 Ah, 80 %
LiIon 1,3 Ah/ 2.6 Ah, 100 %
NiCd 1,3 Ah/ 2,4 Ah
NiMH 2,0 Ah/ 3,0 Ah
unless they are supervised by a per-
son responsible for their safety or
have been instructed on how the
charger or power tool is to be used.
Children should always be supervised to
ensure that they do not play with the
charger or the power tools.
- Do not open the battery pack or the charg-
er. Even after disconnection from the
mains, there is still a high capacitor voltage
inside the charger.
- Make sure that metal objects (such as met-
al chips) do not collect in the battery pack
retaining slots or enter the machine
through the air vent slits (danger of short
circuit).
- Do not charge battery packs from external
manufacturers. The charger is designed for
charging original battery packs only. Oth-
erwise there is a danger of fire and explo-
sion.

Symbols

Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
approx. 22/ 45 min
approx. 35/ 70 min
approx. 25/ 50 min
approx. 50/ 70 min
TRC 3
GB
TRC 3
220 - 240 V ~
50/60 Hz
7,2 - 18 V=
max. 3 A
approx. 0,06 A
-5 °C to +45 °C
via NTC resistor
9

Publicité

Table des Matières
loading

Table des Matières