Tylo SENSE SPORT COMBI 4 Notice D'installation page 14

12
Attach the bracket and spacers to the wall following the spec-
8.
ified dimensioning (see Figure 10).
3
2
3
1
Figure 10: Bracket with screws and spacers
1. 570 mm
2. 280 mm
3. 185 mm
4. 102 mm (minimum distance to wall)
9. Hang up the heater on the bracket see Figure 11.
Figure 11: Hang up the heater.
4
10. Lock the heater into place with two lock screws
(see Figure 12).
Figure 12: Lock screws for bracket
11. Attach the float to the lid by screwing the upper screw tightly
into the threads. Do not forget the spacer on the bottom
side (see figure 13)
Figure 13: Attach the float
12. Fit the cover for the water reservoir and herb grille (see
Figure 14). Take care not to damage the float.
Figure 14: Fit the cover for the water reservoir and herb grille