Control Panel - Panasonic NN-E486MM Mode D'emploi

Control panel

Auto
2
Micro Power
4
Auto
5
Auto
6
Auto
8
9
1
10
min
1
3
min
10
sec
7
10
NN-E486MM
12
1. Display window
2. Microwave power levels button
3. Time buttons
4. Auto weight defrost button
5. Auto weight reheat button
6. Auto weight cook button
7. Timer button
8. Plus/Minus weight selection
control buttons
9. Stop/Cancel button:
Before Cooking:
One press clears your instructions.
During Cooking:
One press temporarily stops the
cooking program. Another press
cancels all your instructions and the
time of day will appear in the display.
10. Start button
N.B. The design of your control panel may vary
from the panel displayed (depending on colour),
but the functionality will remain the same.
„ Beep sound
When a button is pressed correctly a
beep will be heard. If a button is pressed
and no beep is heard, the unit has not or
cannot accept the instruction. At the end
of any complete program, the oven will
beep 5 times.
EN