Control Panel - Panasonic NN-SN690S Manuel D'utilisation

IP2892_39R00CP_26_100310
Display Window
Step by step
instructions scroll
for easy operation.
Popcorn Pad
(☛ page 16)
Sensor Reheat Pad
(☛ page 19)
Power Level Pad
(☛ page 15)
Quick Min Pad
(☛ page 15)
Function Pad
(☛ page 13-14)
Number Pads
Timer Pad
(☛ page 22)
Stop/Reset Pad
Before cooking: One tap
clears memory.
During cooking: One tap
temporarily stops the cooking
process. Another tap cancels
all your instructions and time
of day or colon appears on the
Display Window.
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
NOTE:
If an operation is set and the Start Pad is not pressed, after 6 minutes, the oven will
automatically cancel the operation. The display will revert back to clock or colon mode.
2010.3.10 13:28

Control Panel

NN-SN690S
One tap allows oven to
begin functioning. If door is
opened or Stop/Reset Pad
is pressed once during
oven operation, Start Pad
must be pressed again to
restart oven.
12
Page 14
* The control panel of
NN-SN790S has the
same key layout as
NN-SN690S.
Sensor Cook Pad
(☛ page 19)
Keep Warm Pad
(☛ page 15)
Inverter Turbo
Defrost Pad
(☛ page 17)
More/Less Pad
(☛ page 16)
Clock Pad
(☛ page 13)
Start Pad