Rear Shock - LMX Bikes 161 Manuel De L'utilisateur

3. REAR SHOCK
See DNM shock manual
A. Hydraulic adjustment : Compression
Adjustments are made over the air cartridge by
simply turning the knob marked with a blue "C".
There are 15 adjustment steps.
Hydraulic adjustment
Number of
clicks
When adjusting, it is best to turn the button until the soft stop and
then adjust the desired position. The factory setting is 3 notches
from the "soft" stop (fully unscrewed thumbwheel).
B. Hydraulic adjustment : Rebound
Settings are made in the spring by
simply turning
marked "DNM".
The adjustment range is 20 clicks.
Réglage hydraulique
LENT
Nombre
0 - 7
de clics
Le réglage d'usine est de 6 crans à partir de la position "slow"
(molette complètement dévissée).
HARD
0 - 5
the red wheel
MOYENNE
7-14
MEDIUM
5 - 10
RAPIDE
14-20
SOFT
10 - 15
15