LMX Bikes 161 Manuel De L'utilisateur page 47

2. Retensioning the chain
Loosen the 3 locking screws on the disc
side and crown side by 2 or 3 turns.
Rotate the adjust knob clockwise
direction to loosen the chain and
counter-clockwise to tighten it. Think of
doing the same number of turns on each
side.
Check with the ruler that the position of
the pin in the swingarm is the same on
each side.
Tighten the 6 locking screws m8 to 7 Nm.
6mm allen
key
3 mm
allen key
Ruler
Torque
wrench
18