Cleaning The Lmx - LMX Bikes 161 Manuel De L'utilisateur

Tightening
The tightening of the brake disc FRONT
and REAR
Tightening the crown
Tightening the spokes of the front and
rear wheels
The tension of the chain
Clamping the swingarm shaft
Checking the headset
2. CLEANING THE LMX 161
Disassemble the battery pack during washing.
Do not use high-pressure machines, otherwise damage the stickers or damage
components and impair the performance of the bike.
Maintain the water jet at a minimum distance of 40 cm, avoiding delicate parts
(controller located under the saddle, battery, bearings, axes ...).
After cleaning with water, grease the chain with a grease suited to the conditions of
use.
Level
4 Nm
10 Nm
Check that the spoke tension is always
correct
Tip : tap on the spokes with a
key, they must emit a close
sound
View section: Chain tension
It is normal for the chain to relax at the
first rides
15 Nm
Before each ride
14