LMX Bikes 161 Manuel De L'utilisateur page 51

Firmly hold the stirrup in the palm of your hand and
unscrew the stem retaining the pads
Push the pads down the caliper
We get the three following parts that are to change.
CAUTION : Never activate the brake lever when the caliper and disc are not installed.
You risk to remove the pistons out of the calliper.
Install the new pads and replace the pin and circlip.
Install the caliper on the motorcycle and tighten the two
screws. M6 so as to have a rotation of the wheel AR
without friction pads. Tighten both screws to 10 Nm.
22