Dremel Software Overview - Dremel 3D20 Traduction De La Notice Originale

DREMEL SOFTWARE OVERVIEW

FILE EDIT
LOAD
3D ONLINE
BUILD
1
VIEW
MOVE
ROTATE
SCALE
IDEA BUILDER
TOOLBAR ICONS
The toolbar icons in the Dremel 3D Software lets you
load, share, build, view, move, rotate, and scale your
objects.
Load – Click on "Load" and select a file from the
model files downloaded from Dremel3D.com. The
model that you selected will appear on the Dremel
3D20 home screen. The software's home screen is a
simulation of your Dremel 3D20's build platform.
3D Store – Clicking on "3D Store" will connect you to
Dremel3D.com with your default internet browser.
Build – Dremel 3D Software gives you the ability
to select build quality settings. This allows you to
customize both the build quality and build time.
a. Export Option – Saves your model file to local
drive or portable memory drive for building later.
b. Resolution Options – Models set to Standard
resolution will be built using the default settings.
"Standard" resolution builds will build quickly and
have good surface quality. Models set to "Fast"
resolution will be built with thicker layers and will
build faster. Models set to "Detailed" resolution
will have finer layers and will build more slowly.
c. Support – Select this checkbox to have your
object built with support structures. Dremel
3D20 software will automatically generate
supports for any overhanging sections of your
object. Supports will be easily removable once
your finished object is removed from the build
platform.
View – Changes your view of the Dremel 3D20 home
3
BUILD VIEW TOOLS HELP
STATUS : PRINTING
screen to one of six viewing angles.
TIP: You can view the Dremel 3D20 home screen
from any angle by holding the right click button of your
mouse and moving the mouse. You can also use your
mouse wheel to zoom in and out.
Move – Change your object location on the build
platform using X, Y, and Z axis positioning. You can
also center your object in the build area and ensure
that your object is located on the platform. You can
choose to enter a custom axis position value.
Moves the model to the left or right side of
X
the build area.
Moves the model to the front or back side of
Y
the build area.
Moves the model up and down in relation to
Z
the build platform.
a. On Platform – Places the model onto the build
platform.
b. Center – Centers the model on the 3D build
area.
c. Reset – Resets the model position to the
original position.
Rotate – Changes the orientation of your object on
the build platform using X, Y, and Z axis positioning.
You can choose to rotate your object +/- 90 degrees or
enter a custom axis position value. You can reset the
model to the original orientation.
Scale – Change the size of your object on the build
platform using X, Y, and Z positioning. You can choose
17
2