Steba PB 1 Mode D'emploi page 9

Cleaning:
∙ Ensure that the plug is pulled out of the socket and the
appliance is cooled down completely, before cleaning.
∙ Set the switch to „0"
∙ Never immerse the appliance into water
∙ Never immerse water on the window when it is still hot.
∙ Clean the door, the metal parts in the interior and the surface
with soap water. After that dry all washed parts with a dry cloth.
∙ Don´t use aberasive Materials, acid cleaners, or steel wool for
cleaning.
Put into operation
Put the pizza pan on the driver of the rotary plate and place the pizza stone into the
pan.
∙ Close the lid
∙ Set the thermostat to medium temperature and turn the switch to upper and lower
heat . The red light shines and the green light clocks
∙ Set the timer to 10 minutes
∙
The device will pre-heat. After 10 minutes, open the lid and place the pizza onto the
stone. Bake as described in the recipe suggestions.
Fresh, thin dough ca. 4mm
Fresh, thick dough ca. 6mm
Frozen pizza
If the pizza is not crispy enough, set the switch to lower heat
5 minutes.
Do not place frozen pizzas with aluminum plates or any other packaging into
the device. Do not cover with aluminum foil!
10 – 15 min, upp./low. Heat, max temperature
15 min, upp./low. Heat, max temperature
8 – 10 min, upp./low. Heat, max temperature
and bake for further
9