Playing Cds; Normal Playback - Denon UD-M31 Mode D'emploi

ENGLISH
11

PLAYING CDs

ON / STANDBY
Example: Playing a disc containing 15 tracks and with a playing time of 62 minutes, 3 seconds, starting from the
first track
Press the (open/close) button to open the disc
5
1
tray.
2
Load the CD in the disc tray.
Press the 5 (open/close) button. The disc tray
3
closes.
• The display appears after several seconds.
4
Press the 1 / 3 (play/pause) button.
16

Normal Playback

1, 3 4
CD RECEIVER UD-M31 BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
1 / 3 (play/pause) button
CD RECEIVER UD-M31
ON / STANDBY
Interrupting playback temporarily
Press the / (play/pause) button.
1 3
Resuming playback
Press the 1 / 3 (play/pause) button.
Stopping playback
Press the 2 (stop) button.
NOTES:
• When a disc is loaded, " 00:00 " is displayed on the
display for several seconds while the data on the
number of tracks and total playing time is being read
from the innermost side of the disc, after which the
number of tracks and total playing time appear.
• The CD SRS button of the cassette deck (DRR-M31)
will not function if pressed while the disc is being
read. Please press this button after the total playing
time has been displayed.
2 (stop) button
BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
The " 3 " mark appears on the display, and
playback stops at the point where the button
was pressed.
The " 3 " mark turns off on the display, and
playback resumes from the point where the
pause button was pressed.
BAND
• If no disc is loaded, if the disc is upside down, or if the
data cannot be read properly due to scratches or dirt,
the display reads as shown below and the disc will
not play.