HBM SLB-700A/06 Notice De Montage page 7

SLB-700A/06, SLB-700A/12
This includes people who meet at least one of the three following require­
ments:
- Knowledge of the safety concepts of measurement and automation
technology is a requirement and as project personnel, you must be familiar
with these concepts.
- As measurement and automation system operating personnel, you have
been instructed how to handle the machinery. You are familiar with the op­
eration of the equipment and technologies described in this documentation
- As commissioning engineers or service engineers, you have successfully
completed the training to qualify you to repair the measurement and au­
tomation systems. You are also authorized to activate, ground and label cir­
cuits and equipment in accordance with safety engineering standards.
It is also essential to comply with the legal and safety requirements for the ap­
plication concerned during use. The same applies to the use of accessories.
Strain transducers must only be installed by qualified personnel, strictly in ac­
cordance with the specifications and with the safety requirements and regula­
tions listed below.
A2112-3.0 en/de/fr
7
HBM