Triton 2000 Série Instructions D'utilisation Et Consignes De Sécurité page 55

Assembly & Operating Manual
TABLESAW MODE
Thank you for your purchase of the Triton Series 2000 Workcentre. If properly set up,
and fitted with a good quality saw and blade, it will give you great accuracy and many
years of trouble-free service.
To set up properly, make sure you follow this manual. Otherwise you could spend
many unnecessary hours, and still not get it right.
TERMS AND SYMBOLS USED IN THIS MANUAL
"Front of the Workcentre" refers to the end which has the switchbox. The "left-hand &
right-hand side" are when viewed from the front of the Workcentre.
Safety warning or safety instruction.
Possible fitting or operating difficulty.
Handy hint & tip.
Parts list
Basic assembly diagram
Fitting the Triton Precision Saw
Fitting other brands of saw
Final assembly
A WORD FROM THE MANUFACTURERS
2
3
4-5
6-7
8-11
Workcentre
Workcentre
CROSSCUT MODE
Take special note of this instruction.
!
WARNING! Do not attempt this.
Test Cuts - Table saw mode
Test Cuts - Crosscut mode
Operating - Table saw
Operating - Crosscut saw
Warranty & Mailing List
Quality
Endorsed
Company
12-13
13-14
15-23
24-27
28