Cleaning, Maintenance And Storage; General Cleaning And Maintenance Work; Changing The Blade; Storage - Grizzly ERM 1743-20 Traduction De La Notice D'utilisation Originale

Switch off the equipment after
work and in order to transport it,
disconnect the plug and wait until
the blade stops. There is a risk of
injury.
Cleaning, Maintenance
and Storage
Have work that is not described
in these instructions carried out
by a customer service centre
that we have authorised. Use
only original parts.
Wear gloves when handling the
blade.
Switch off the equipment before all
maintenance and cleaning work,
disconnect the plug and wait until
the blade stops. There is a risk of
injury.
General Cleaning and
Maintenance Work
Do not hose down the lawnmow-
er with water.
• Always keep the equipment clean. To
clean, use a brush or cloth but no de-
tergent or solvent.
• After mowing, use a piece of wood
or plastic to remove adherent plant
remains from the wheels, ventilation
holes, ejection hole and blade area.
Do not use hard or pointed objects, as
these may damage the blade.
• Oil the wheels from time to time.
• Before each use, check the lawnmow-
er for obvious defects such as loose,
worn or damaged parts. Check that
all nuts, bolts and screws are sitting
fi rmly.
• Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.

Changing the Blade

If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade
is damaged or showing signs of imbal-
ance, it must be replaced (see chapter on
"Spare Parts").
1. Switch off the equipment, dis-
I
connect the plug and wait until
the blade stops.
2. Turn the equipment over.
3. Use sturdy gloves and hold the
blade fi rmly (19). Turn the blade
screw (18) anticlockwise off of
the motor spindle (20) using a
screwdriver (AF 13 mm).
4. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened fi rmly.

Storage

• Keep the equipment dry and out of
reach of children. Loosen the wing
nuts and fold down the handle bar so
the equipment takes up less space.
See the diagramm
cable is not caught.
• Allow the motor to cool before storing
the equipment in a confi ned space.
• Do not cover the equipment with nylon
bags as moisture could build up.
IE
GB NI
H
. Ensure that the
31