Chimney Fire; Power Failure Or Longer Switch-Off Of The Main Switch; Recommissioning; Cladding - Olsberg Levana Aqua Manuel D'utilisation

Chimney fire

If there is a chimney fire, proceed as follows:
● Switch off appliance.
● Notify the fire department and chimney sweep.
● Minimize the air supply on the stove.
● Allow the chimney to burn out in a controlled man-
ner.
● Have the cause investigated by specialised person-
nel.
Power failure or
longer switch-off of the main switch
In the event of power failure or longer switch-off of the
main switch, the controller saves important combus-
tion-related data and settings.
When the appliance is again supplied with power it will
be regulated to the operating status prior to the pow-
er failure.
If the appliance is not supplied with power for longer
than 14 days, date and time must be reset. The con-
troller recognises this and automatically changes to the
"date & time" menu after switching on.

Recommissioning

● After longer operating interruptions you must check
for unhindered extraction of waste gas.
● Prior to switching on, check and if necessary top up
the pellet tank.
● Prior to each start, subject the combustion pan to a
visual inspection and clean it if necessary. Ensure
that pellets are not manually placed in the combus-
tion pan.

Cladding

● The natural stone cladding is manufactured from a
"natural" block of stone, consequently the structure
and the colouration can be very different.
● The surface can change due to temperature.

Inspection door

The inspection door below the combustion cham-
ber is fitted with a magnetic pressure closure. It can
be opened by lightly pressing on the button (Olsberg
logo). Likewise it can be closed by lightly pressing.
Press here
67