Display
settings
done?
yes
/ no
manual
power:
4
off
Tu,08:55
next
manual
power:
4
off
Tu,08:55
next
Menu select
Display
menu select
operation mode
settings
information
In the menus, "operation mode, "settings" and "information", the following selection possibilities are pro-
vided, which are described in detail in the appropriate chapters:
Display
operation mode
manual
automatic
Action
Description
Settings done?
or
Select with ↓ or ↑ "yes" or "no" and confirm with
(ENTER).
The display changes automatically to "manual" mode
(factory setting).
Even at this point in time, without additional settings,
manual operation of this appliance is possible.
or
For this, select the power level and start heating with
the "Fire-key" (see chapter "Operation mode manu-
al" for more detailed information).
If you desire the "automatic" operation mode or want
to store time programs, do not start the appliance
and proceed as follows.
With ↓ go to the "next" display and go to "menu se-
lect" with (ENTER).
Action
Description
The following menus can be selected with ↓ or ↑ and
called up with (ENTER):
or
● operation mode
● settings
● information
Action
Description
Operation mode
The following operation modes can be selected with
↓ or ↑ and called up with (ENTER):
● manual
or
In "manual" mode the appliance heats in the pre-
set time programs depending on the selected
power level.
● automatic
In "automatic" mode the appliance heats in the
preset time programs depending on the selected
room temperature.
51