Connection Of The Appliance; Commissioning - Olsberg Levana Aqua Manuel D'utilisation

Connection of the appliance

● Plug the provided 5 pole plug into the socket on the
rear of the appliance (Fig.5). If the appliance will
be operated with accessories (external room ther-
mostat and / or remote control) the connecting lines
must be connected to the plug beforehand as de-
scribed in the accessory instructions.
Attention: Even without accessories the plug must
be plugged in, otherwise the appliance is not oper-
ational.
● Plug the earthed plug into a 230V / 50Hz - earthed
electrical socket.

Commissioning

● Fill the pellet tank with pellets.
● Place the main switch on the right side of the appli-
ance in the "I" position (Fig.6).
● The display will be activated automatically.
Display
1.00.35
language
Deutsch
English
Français
date & time
22.10.2012
08:43
next
date & time
18.12.2012
10:20
next
50
Fig.5
Fig.6
Action Description
The software version (e.g. 1.00.35) and the Olsberg
logo will be displayed.
The next screen appears automatically after 5 sec-
onds.
Language
or The following languages can be selected:
Deutsch, English, Français
Select the language with ↓ or ↑ and confirm with
(ENTER).
Date & time
or
Select the value that should be set with ↓ or ↑ and
confirm with (ENTER). The value will flash.
Adjust the value with ↓ or ↑ and confirm with (ENTER).
If date & time are set, go to the "next" display with ↓.
Go to the next display with (ENTER).
Plug 5 pole