EN•ENGLISH
• Please read this manual carefully in order to
familarize yourself with the use and care of your
new product. Please keep this manual for use as a
future reference guide.
• PEG PEREGO reserves the right to make any
necessary changes or improvements to the
products shown at any time without notice.
CUSTOMER SERVICE
If parts of the model are accidentally lost or
damaged, use only original Peg Perego spare parts.
Contact the Peg Perego Customer Service for all
repair work, replacements, information about
products, and sale of original spare parts and
accessories, at the following:
tel.: 905.839.3371
fax: 905.839.9542
Call us toll free: 1.800.661.5050
www.pegperego.com
INSTRUCTIONS FOR USE
SEAT FITTING
1• Fold back the footrest and raise the backrest
to the desired position by pulling the handle on
the rear of the backrest, as shown in the figure.
2• To fit the front bar, remove the plugs onto the
armrests pushing from underneath and detach
the squared bushes from the armrests.
3• Place the squared bushes on the front bar as
shown in the figure, insert the front bar into
the armrests and complete the fitting by
replacing the plugs into the armrests.
TO FIT AND REMOVE THE SEAT
Before fitting and removing the seats, always
apply the brake.
4• To fit the PrimoGiro seat to the frame, place it
as shown in the figure and press down with
both hands till it clicks.The seat can be
mounted facing the mother or outwards.
5• To remove the seat pull the Ganciomatic lever
in the direction of arrow A and simultaneously
press in direction of arrow B and pull the seat
upwards.
TO ADJUST THE BACKREST
6• The seat backrest reclines to four positions.To
raise or lower the backrest, pull up the lever
and lock it in the desired position.
TO ADJUST THE FOOTREST
7• A:The Elegante footrest can be adjusted in two
positions, high and low:The baby lies when the
footrest is in the higher position and seats
when it is in the lower position.To adjust the
footrest, see the figure. B:The leg rest can be
raised only as shown in the figure, leaving the
footrest lowered.
SAFETY BELT
8• A: Make sure that the brace is properly
inserted by pushing as shown in the figure. B:
Fasten the belt as shown in the figure.
9• To unfasten the belt, press on the buckle sides
and pull out the waist strap.
10• The new safety belt is now easier to fasten
thanks to the "snap-open-and-shut" device.
Before fastening the safety belt, attach the
buckle to the backrest by inserting the tab
through the special holder, as shown in the
figure. After fastening the safety belt on your
child, detach it from the backrest to allow the
child more freedom of movement. The buckle
must remain below the child's shoulders.
REMOVABLE FRONT BUMPER BAR
When the children grow up, you can remove
the front bumper bar.
11• Remove the plugs from the armrests, pushing
from underneath with one hand and detach the
front bumper bar.
12• Remove the front bumper bar squared bushes
pulling them upwards and insert them into the
armrests, taking care that the solid side faces
outwards; complete the fitting replacing the
plugs into the armrests.
HOOD AND COVER
13• To mount the hood, insert the fittings in the
arms of the seat and button them behind the
backrest.
14• By opening the zipper, the mesh insert on the
hood provides better ventilation for the baby
and allows you to see him from all angles.
15• To release the hood, press the red button
mounted on the arm and simultaneously lift
the hood fitting.
16• Once the hood has been mounted, you can
mount the cover. Place it on the seat and
button it to the hood as indicated by the
arrow.The cover has buttons for use with the
footrest when it is lowered.
LINE OF ACCESSORIES
17• Sun Canopy: To fit the sun canopy, insert the
ratchet bracket into the armrest slots; to
detach the canopy, press the red buttons at the
sides of the armrests while pulling the sun
canopy upwards.
18• Cover All rain canopy: Cover All rain canopy in
clear PVC for the Navetta and Primo Nido
bassinet units and for the Primo Giro and
Elegante carrying seats.
19• Middle-sized Satchel:The satchel has a plastic
interior that is easier to keep clean, large
pockets for carrying things, and a pad for
changing the baby's diaper. It fastens to the
stroller with side hooks.