Headset Controls - Plantronics Voyager 815 Guide De L'utilisateur

hEAdSET CONTrOLS

action
Turn on the
headset
Turn off the
headset
Answer a call
End a call
Make a call
Toggle mute
on/off
Turn off the
online indicator
Adjust volume
WarnInG:
Do not use headphones / headsets at high volumes for an extended
period of time. Doing so can cause hearing loss. Always listen at moderate levels. See
www.plantronics.com/healthandsafety for more information on headsets and hearing.
Plantronics Voyager 815
Steps
Press and hold the call control button until the indicator
glows blue.
nOTe:
When your headset is in standby mode, the indicator is off.
To confirm that your headset is on, press any button or slide the
boom out. You should see a blue light flash or hear a tone.
Press and hold the call control button until the indicator
glows red. When the power is off, the indicator stays off.
Press the call control button or slide the boom to the open
position.
Briefly press the call control button or slide the boom to
the closed position.
The call automatically transfers to your headset after you
enter the number on your phone and press send.
Press the mute button.
Press and hold mute for 2 seconds while the headset is on.
Headset will flash blue 4 times. Repeat action to activate
online indicators. Headset will flash blue 2 times.
During an active call, press the volume button:
Volume up
Volume down
11