Indicators; Range - Plantronics Voyager 815 Guide De L'utilisateur

Micro-casque bluetooth
Masquer les pouces Voir aussi pour Voyager 815:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

iNdiCATOrS

action
Charging
Fully charged
Low battery
Pairing
Paired
Turning on
Standby
Incoming call
Call in progress
Missed call
Out of range
Back in range
Turning mute on
Mute is active
Unmute
Turning off
nOTe:
To turn off the online indicator, see "Headset Controls" on page 11.

rANgE

To maintain a connection, keep your headset within 33 feet (10 metres) of
the Bluetooth device. If there are obstacles between your headset and the
device you may experience interference. For optimal performance, place
your headset and phone on the same side of your body.
As you move out of range, audio quality degrades. When you are far enough
away to lose the connection, you hear a high tone in the headset. The headset
attempts to reconnect after 30 seconds. If you move back in range later, you
can manually reconnect by pressing the call control button.
nOTe:
Audio quality is also dependent upon the device with which the headset is
paired.
Plantronics Voyager 815
Light
Solid red
None
3 red flashes every 10 seconds
Flashes red and blue
Flashes blue
Solid blue for 2 seconds
None
3 blue flashes every 2 seconds
1 blue flash every 2 seconds
3 purple flashes every 10 seconds
None
None
None
None
None
Solid red for 4 seconds
Tone
None
None
3 high tones
every 10 seconds
1 low tone
1 low tone
Ascending tones
None
3 low tones every
2 seconds
None
None
1 high tone
1 low tone
1 low-high tone
1 low tone every
60 seconds
1 high-low tone
Descending tones
13

Publicité

Table des Matières
loading

Table des Matières