ETATRON D.S. eOne MF Notice D'installation, Emploi Et Entretien page 51

SAFETY STANDARDS
Warnings
Carefully read the warnings listed below as they provide important information regarding safe installation, use
and maintenance. Store this manual carefully for future reference.
PLEASE NOTE: The pump is made to perfection. Its durability, electrical and mechanical reliability will be enhanced if it
is correctly used and undergoes regular maintenance.
WARNING: Any intervention or repair within the equipment must be carried out by qualified and authorized personnel.
We disclaim all responsibility as a result of non-observance of this rule.
Symbols used in the manual
Precedes information that is inherent
to safety. It flags something that is
Dosage of hazardous and/or toxic liquids.
To avoid damage to persons or property arising from contact with hazardous liquids or toxic fumes, in addition to
compliance with the instructions contained in this booklet, the following standards should be made well aware of:




GENERAL INSTRUCTIONS
Intended use of the pump
The pump should be used only for the purpose for which it was expressly designed, namely the dosing of liquids. Any
other use is considered improper and therefore dangerous. The pump is not intended to be used for applications not foreseen
in the design phase For further information the customer is required to contact our office where you will receive information
on the type of pump in his possession, and its proper use. The manufacturer cannot be held responsible for any damage
caused by improper, incorrect or unreasonable use.
The electronic dosing pump must be used to dose small amounts of additive to modify the concentrations of
treated liquid.
Transport and handling
Transport must be carried out with respect to the orientation shown on the packaging. The expedition carried out by
whatever means, even if carriage paid by the buyer or recipient, is to be carried out at the purchaser's risk. A claim for
missing materials must be received within 10 days of receipt of the goods, and within 30 days for defective goods. If pumps
have to be returned it must be agreed beforehand with authorised personnel or with the official distributor.
56
ENGLISH
PROHIBITED
not to be done.
Operate as recommended by the manufacturer of the liquid (additive) to be used.
Check that the hydraulic part of the pump is not damaged or broken and use the pump only when in perfect
condition.
Use tubes suitable for the liquid and the operating conditions of the plant, inserting them possibly inside PVC
protection tubes.
Before you turn off the dosing pump you must neutralize the hydraulic part with the proper reagent.
WARNING
Precedes a text that is very important
for the protection of the health of
exposed persons or for the machine
itself.
INFORMATION NOTICE
Precedes information concerning the
use of the equipment.